Steel Building in Birmingham, Alabama
Metal Building Outlet supplied this steel building in Birmingham, Alabama. This building was designed for use as a wedding venue for The Carriage House at Park Crest Event Center.
Metal Building in Odenville, Alabama
Metal Building Outlet supplied these two metal buildings to a customer in Odenville, Alabama, in June of 2014. Sized 40’x60’x14’, these Steelmax-brand buildings together serve as a workshop. The buildings boast a total of (8) framed openings, including (4) 10’x12’ overhead doors and an additional (4) 3070 Lever Lock doors, and each has a Galvalume roof with a 1:12 roof pitch.
To ensure that those using the buildings stay comfortable regardless of seasonal or climate conditions, the two buildings were constructed with R-13 roof insulation in both the roof and walls. Additionally, both buildings have a wind speed of 90 mph and a ground snow load (GSL) of 5 lbs.
Odenville is a small, 3.2 square mile town of under 1,500 inhabitants located in St. Clair County, in north-central Alabama. It lies about 30 miles from Birmingham, the state’s largest city, and 86 miles outside Tuscaloosa.
For Alabama contractor click here
Metal Building in Birmingham, Alabama
Metal Building Outlet supplied this steel building in Birmingham, Alabama. This SteelMax building was purchased in June, 2013 and is used as an automotive shop for a Jefferson County trucking company. The building is attached to an existing office.
The completed dimensions for this building are: 60’x80’x16’. The exterior walls on the metal shop are an attractive light stone color. The 1:12 pitched roof is galvalume. Due to the location of the building (central Alabama), about 25 miles from Alabaster and Warrior, the wind load upgrades allow this building to stand up to Mother Nature – wind load of 90 MPH and a low snow load of 3.5 PSF.
For Alabama contractor click here
Steel Building in Hueytown, Alabama
Metal Building Outlet supplied this steel building in Hueytown, Alabama, for a general contractor in Jefferson County. Located about 50 miles from Tuscaloosa and about 20 miles from Hoover, this Steel Max building is rated to handle the high wind load and low snow loads of northern Alabama.
The owner of the building has erected several steel buildings and decided to erect this building himself. Metal Building Outlet was able to help him get his building in the time frame he needed by putting the order in a rush status and changing the supplying factory from which the steel building components were shipped.
Used to store construction equipment, this building is a frame and roof only structure with finished dimensions of 40’x128’x10’. It has a wind load of 90 MPH and snow loads for ground and roof of 10 PSF and 7 PSF.
Contact Us for a local Contractors in Alabama
Metal Building in Irondale, Alabama
Metal Building Outlet supplied this steel building in Irondale, Alabama, a suburb of Birmingham. Located in northern Alabama, this Jefferson County building is only about 5 miles from Birmingham and about 10 miles from Leeds.
This Nucor metal building is used as a lean-to and is attached to an existing building with one open side and a galvalume single slope roof (1:12 pitch). The roof has a height of 16’ on the lower side and 20’2” where it attaches to the existing building.
Since the climate in Irondale means that there is little or no snow, this building has a very low snow load with the ground snow load being 5 PSF and the roof having a snow load of 3.5 PSF. Wind load for this building is rated to 90 MPH for the blustery climate, prone to storms and in a hurricane risk area.
In addition to the open back side of the building, there are two doors. There is a 3’x7’ walk door and a 14’x14’ door. The completed size of this metal lean-to is: 50’x200’x16’.
Contact Us for a local Contractors in Alabama
Steel Building in Opp, Alabama
Metal Building Outlet supplied this steel building in Opp, Alabama about 80 miles from Montgomery. The company Gator Steel needed a large shop building and garage to store trucks and equipment.
Metal Building in Brewton, Alabama
Metal Building Outlet supplied this metal building in Brewton, Alabama in January, 2011. It was for a church that needed a storage addition to their building. They needed an oversized 4 car garage for their fleet of vans.
Metal Building in Emelle, Alabama
Metal Building Outlet supplied this metal building in Emelle, Alabama. The 60’ x 125’ x 14’ building has an R-19 insulation package for the walls and roof made the steel building comfortable and energy efficiency.
Church Building in Emelle, Alabama
A third party contractor ordered this metal church building from Metal Building Outlet for his customer in Emelle, Alabama. This building is located about 150 miles from Montgomery, AL.