Steel Building in Springville, California

Metal Building Outlet was the supplier of this pre-engineered metal building in Springville, California, in October of 2017.

Rugged, sustainable and economical, the steel building boasts a bold, Sierra Green exterior and is comprised of rugged, premium-grade steel components. Reserved for private usage, the building stands 40’x60’x14’ in size once erect, while a hardwearing, corrosion-resistant Galvalume roof with a 2:55 pitch sits overhead.

Throughout the building are (4) framed openings varying in size, among them (1) 3070 opening equipped with (1) 3070 walk door, (1) 12’x12’ opening with (1) 12’x12’ walk door and (2) 10’x10’ openings, each enclosing one of (2) 10’x10’ metal doors. Additional project features include a 110-mph wind speed rating and a 10-pound snow load.

A sparsely populated, census-designated place set within California’s Tulare County, Springville sits about 176 miles from Los Angeles and roughly 35 miles outside Farmersville.

Click here for assistance finding a California building contractor.

Metal Building in Hanover, Michigan

Metal Building Outlet was the supplier of this pre-engineered metal building in Hanover, Michigan, in late June of 2019.

Used for miscellaneous purposes, the building offers top-of-the-line steel construction, resulting in unsurpassed structural integrity. Once erect, it offers a finished size of 60’x100’x16’, and it has high overhead clearance and an unobstructed clear span that makes the most of every usable square foot.

The roof of the steel building has a 1:12 pitch and is comprised of rugged Galvalume metal panels, and it has a corrosion-resistant nature that helps prevent mold growth and other moisture-related damage. The shop counts (4) framed openings among its customizations, which include (3) 3070 walk door openings enclosing (3) 3070 walk doors and (1) 12’x14’ opening enclosing (1) 12’x14’ overhead door. The property also features (5) 12’x10’ roof vents, which help facilitate proper ventilation throughout the space.

Additional customizations made in consideration of the climate characteristics of Hanover, as well as any building codes in place at the address, include a 25-pound snow load and a 115-mph wind speed rating. A small, lightly populated village in Hanover Township, Hanover is a part of Jackson County. The southern Michigan community sits about 53 miles south of Lansing, the Michigan state capital, and roughly 50 miles southeast of Battle Creek.

Click here for assistance finding a Michigan building contractor.

Prefab Metal Building in Odenville, Alabama

Metal Building Outlet supplied this prefabricated metal building for a buyer in Odenville, Alabama, in April of 2016.

Crafted from top-of-the-line steel components, the building stands 40’x60’x14’ in size and is now used as a garage. Its roof is made of rugged, corrosion-resistant Galvalume metal and has a 1:12 roof pitch. Inside the metal garage building are (7) framed openings varying in size and function, among them (2) 10’x10’ openings housing (2) 10’x10’ Model 2500 roll-coil doors, (1) 12’x10’ opening harboring (1) 10’x12’ Model 2500 roll-coil door, (2) 3070 walk doors for convenient user access and (2) 4030 windows to help maximize the presence of natural sunlight inside.

A wind speed of 90 mph and a snow load of 5 lbs. serve as additional project features. These inclusions were made to enhance durability given the climate conditions typical of Odenville and the surrounding area.

A town located within north-central Alabama’s St. Clair County, Odenville is situated about 91 miles outside Huntsville and about 30 miles from Birmingham.

Click here for help finding an Alabama contractor.

Steel Building in Beaver Dam, Arizona

Metal Building Outlet supplied this pre-engineered steel building for a buyer in Beaver Dam, Arizona, in early April of 2016.

Rugged, durable and energy efficient, the building is now used as a garage and stands 30’x35’x12’ in size. Boasting fox grey paint, the building is covered overhead by a hardwearing, corrosion-resistant Galvalume metal roof with a 1:12 roof pitch. Inside the garage are (2) framed openings, both of which are 10’x8’. To considerably lower energy bills associated with the building while also improving comfort and noise control, R-19 metal building insulation is installed in the building’s roof, while R-13 insulation can be found in the walls. The garage also features a wind speed of 115 mph to enhance durability given the typical climate and weather patterns of the area.

An unincorporated community in northwestern Arizona’s Mohave County, Beaver Dam lies about 73 miles outside Colorado City and 12 miles outside Mesquite, Nevada.

Click here for help finding an Arizona contractor.

Prefabricated Steel Building in Salinas, California

Metal Building Outlet was the proud provider of this pre-engineered steel building in Salinas, California, in mid-July of 2019.

Currently in use as a drive-thru, the structure is comprised of reliable, heavy-gauge steel components, and once erect, it stands 40’x74’x20’ in size. The drive-thru’s high overhead clearance makes it suitable for vehicles in a wide range of heights and sizes, and the building also offers unmatched structural integrity, holding its own in the face of heavy wind and rain, pests and similar sources of damage.

The roof of the steel drive-thru has a 1:12 pitch and is comprised of hardwearing, corrosion-resistant Galvalume panels. A 110-mph wind speed rating serves as an additional attribute included with regard for the climate and building code requirements governing construction at the build site.

The largest community in California’s Monterey County, the city of Salinas is located in the southern part of the Greater Bay Area. The community sits about 90 miles from King City and roughly 60 miles south of San Jose.

Click here for assistance finding a California building contractor.

Steel RV Storage Building in Como, Colorado

Read more

Pre-Engineered Shop & Garage in El Cajon, California

Metal Building Outlet sourced this preconstructed steel garage building on behalf of a customer in El Cajon, California, in late March of 2019.

Now used as a workshop and garage, the building features premium-quality steel construction, and following a streamlined erection process, it stands 20’x105’x12’ in size. Overhead, it features a hardwearing, Galvalume Plus metal roof with a 1:12 pitch, which offers a solid layer of protection from the elements while helping guard against corrosion and moisture-related damage.

Durable, versatile and low maintenance, the building requires little in terms of upkeep, and steel buildings can typically maintain their aesthetic appeal with little more than an occasional power wash. A 110-mph wind speed rating serves as a supplemental shop and garage feature; an addition made in consideration of local climate patterns and in compliance with local building codes.

Situated about 17 miles east of Downtown San Diego, the city of El Cajon is a part of San Diego County. The community sits just north of Spring Valley and just south of Santee.

Need help erecting a steel building? Click here for assistance finding a California building contractor.

Pre-Engineered Steel Building in Willits, California

Metal Building Outlet supplied this prefabricated steel building for a client in Willits, California, in April of 2019.

Offering unparalleled strength and durability, the building is comprised of rugged, high-end steel components, and it now serves miscellaneous purposes for its owner. Once raised, the metal building stands 50’x60’x14’ in size, and it features an open, clear-span design that creates an obstruction-free interior.

The steel building boasts a striking, Fern Green exterior, while a complementing Charcoal Grey roof with a 4:12 pitch sits overhead, offering a solid layer of protection from the elements. The metal building also features (4) framed openings throughout, which include (1) 3070 opening, (1) 10’x10’ opening and (2) 4030 window openings that allow natural sunshine into the space.

Supplemental features added in adherence to local building code requirements include a 110-mph wind speed rating and a 10-pound snow load. Rugged, durable and designed to last for generations, this building provides a safe, secure space to store goods, perform work or utilize for any number of other purposes.

Part of Northern California’s Mendocino County, the city of Willits is known as the “Gateway to the Redwoods.” The community sits about northwest of Ukiah and about 135 miles outside San Francisco.

Need help erecting a steel building? Click here for assistance finding a California building contractor.

Energy-Efficient Metal Building in Williams, California

Metal Building Outlet supplied this prefabricated metal building for a customer in Williams, California, in April of 2019.

Rugged, energy efficient and built to last, the Light Stone-colored metal building is comprised of durable, top-quality steel components, and it stands 40’x60’x16.5’ in size. Serving miscellaneous purposes, it features a clear-span design that eliminates interior trusses or obstructions, while overhead, a Galvalume steel roof with a 1:12 pitch protects the interior of the building from the elements.

Installed in the roof and walls of the steel building is R-13 insulation, which reduces energy bills associated with the property significantly while making it better-suited for year-round use. It also has (2) framed openings; (1) 12’x14’ opening enclosing (1) 12’x14’ overhead door and (1) 3070 opening enclosing (1) 3070 walk door. A 110-mph wind speed rating serves as an additional customization made in adherence to local building code requirements.

Part of Northern California’s Colusa County, the city of Williams covers about 5.5 square miles. The community lies about 90 miles from Santa Rosa and about 74 miles outside Roseville.

Need help erecting a steel building? Click here for assistance finding a California building contractor.

RV Storage Building in Oak Hills, California

Read more