Steel Building in Cornelia, Georgia
Metal Building Outlet supplied this steel roof only building in Cornelia, Georgia in March, 2014. This roof only building is used as storage in Habersham County in northeastern Georgia, about 40 miles from Buford and 75 miles from Atlanta.
The galvalume roof is made with high-quality SteelMax components and has a pitch of 1:12. The finished size of this covered storage is 40’x50’x16’. To meet the building code and demands of the region it has a wind load of 90 MPH and has a 3.5 PSF snow load.
For Georgia contractor click here
Steel Building in Jeffersonville, Georgia
Metal Building Outlet supplied this steel building in Jeffersonville, Georgia in March, 2014. Thebuilding is used as a shop in the heart of historic Twiggs County and is about 30 miles from Macon and Dublin.
The SteelMax building has been engineered to the climate of central Georgia with a 93 MPH wind speed load and a 3.5 PSF snow load for the 1:12 pitched galvalume roof. The finished size of this shop is: 40’x80’x22’ and there are 6 large 14’x16’ overhead doors to give access to the interior of this shop.
For Georgia contractor click here
Steel Building in Christmas, Florida
Metal Building Outlet supplied this steel building in Christmas, Florida in February, 2014. The building is used as a multi-purpose building by the owner in Central Florida Orange County. He uses the building as a personal shop and garage on his property, about half an hour from Orlando and Deltona.
Comprised entirely of SteelMax parts, this building is engineered to the climate and has a wind speed rating of 134 MPH. The exterior walls are burnished slate and the roof with a 3:12 pitch is galvalume. There are three doors on the building (1) 12’x12’ overhead door , (1) 3’x7’ and (1) 6’x7’ walk doors.
For Florida contractor click here
Metal Building in Phoenix, Arizona
Metal Building Outlet supplied this steel building in Phoenix, Arizona in March, 2014. This building in the heart of Maricopa County is used as a shop and is less than 20 minutes from Mesa and Scottsdale in southern Arizona.
Built with high-quality Bunger components, this shop is functional and attractive inside and out with light stone exterior walls and a galvalume roof. The completed dimensions after erection are 26’x50’x16’ and the roof has a 1:12 pitch.
The owner of this shop building purchased 7 doors for the building. Six of these are 14’x14’ overhead doors and the seventh is a 3’x7’ walk door.
For Arizona contractor click here
Steel Building in Mills, Wyoming
Metal Building Outlet supplied this steel building in Mills, Wyoming in April, 2013. This metal building is used as a warehouse and an office, about 50 miles from Douglas and about 5 miles from Casper in Natrona County, just off the historic Oregon and Mormon trails.
The Nucor components are durable and versatile, and this building is both. The exterior walls are attractive (fox gray) and the roof is galvalume. The total dimension of this building is 80’x120’x18’ and the roof has a 1:12 pitch. In the front of the building, there is a 10’x10’ vestibule and there are many (10) store front 4’x5’ windows (preassembled) with snap on aluminum trim. There are also (8) 3’x7’ and (2) 6’x7’ high quality steel walk doors to allow entry to the interior of this building. This building is rated to handle wind and snow loads of central Wyoming with a wind speed rating for up to 90 MPH and a roof snow load of 30 PSF.
For Wyoming contractor click here