Metal Building in Lenox Township, Michigan

Metal Building Outlet supplied this steel building in Lenox Township, Macomb County, Michigan in January, 2014. This building features steel components from Nucor and is used as equipment storage and warehouse for FDM Excavating, about 30 miles from Rochester hills and about 4 miles from Richmond.

Generously sized 90’x150’x24’ and featuring light transmitting panels across both side walls, this building also has 24 skylights in the ceiling panels.  Adding to the natural lighting are (6) 3’x5’ windows. For access to the interior, ten doors are installed on this warehouse/storage building (6) 16’x18’ and (4)3’x7’ walk doors.

The galvalume roof of this building has a 2:12 pitch. In order to meet the demands for wind and snow loads for southeastern Michigan, this building is rated for wind speeds of up to 90 MPH and a ground snow load of 25 PSF.

For Michigan contractor click here

Steel Building in Rockford, Michigan

Metal Building Outlet was the provider of this prefabricated metal building in Rockford, Michigan.

Durable, functional and easy to maintain, the building boasts a finished size of 40’x60’x14’, and it serves dual purposes as a combination shop and storage area. Covering and protecting the interior of the building from above is a hardwearing Galvalume metal roof with a 1:12 pitch, and the shop and storage building itself is crafted using high-end steel materials.

Inside the structure is (1) 10’x10’ framed opening enclosing (1) 10’x10’ roll-coil door, and a snow load of 35 lbs. and a wind speed rating of 90 mph are included as additional project features. The latter two additions were made in consideration of the ample seasonal snowfall that falls in the region and the area’s otherwise highly variable weather patterns. A city situated within Kent County in Michigan’s Lower Peninsula, Rockford is located about 42 miles from Muskegon and about 15 miles outside Grand Rapids.

Click here for assistance finding a Michigan building contractor.

Steel Storage Building in Shelby Township, Michigan

Metal Building Outlet supplied this prefabricated steel building in Shelby Township, Michigan.

Light stone in color with an eye-catching green roof and a 1:12 roof pitch, the Michigan metal building stands 30’x40’x16’, and is used as a storage area by FDM Contracting, Inc., a Shelby Township-based general contracting company. Constructed using Nucor Building Systems components, the building has (1) framed opening, which is 14’x14’ in size.

Shelby Township experiences considerable annual snowfall that trumps national averages, and with the area’s typical climate and weather patterns in mind, the steel building was constructed with a wind speed of 90 mph and a snow load of 18 lbs.

Located within Oceana County in Michigan’s Lower Peninsula, Shelby Township lies about 25 miles from Southfield and 17 miles outside Pontiac.

For Michigan contractors click here

Storage Building Kit in Bouton, Iowa

Metal Building Outlet provided this prefabricated metal building for a customer in Bouton, Iowa, in October, 2016.

Rugged, long-lasting and low maintenance, the building boasts a finished size of 60’x80’x16’. Crafted from premium-grade steel components and now used for storage purposes, it is covered and protected from the elements by a corrosion-resistant Galvalume metal roof with a 1:12 pitch. Inside the metal storage building are (2) framed openings; (1) 3070 opening and (1) 14’x14’ opening.

Several additional accommodations were made in consideration of the variable climate and seasonal snowfall common throughout the region. A wind speed rating of 115 mph serves as an additional project feature, as does a snow load of 25 lbs. A small city set within central Iowa’s Dallas County, Bouton is a part of the Des Moines – West Des Moines Metropolitan Statistical Area. It lies about 37 miles outside Ames and about 7 miles from Perry.

Click here for help finding an Iowa contractor.

 

Metal Building in Vail, Iowa

Metal Building Outlet supplied this metal building in Vail, Iowa.  Located in Crawford County in central western Iowa Vail is about 110 miles from Des Moines.

This huge Nucor machinery storage building has been used by its owner since January, 2011.  This building has a little bit of everything that a metal building can offer with several options for framed openings as well as an energy efficient insulation package for both walls and roof.

The building is a spacious 60’x100’x20′.  The walls of this building are insulated with an R-19 rating and the roof is insulated with an R-32 rating.  The roof of this building has a 2:12 pitch. Featured on this building are three framed openings each used for doors.  The largest of these doors is a 30’x18’ overhead door.  The remaining doors are two 3’x7’ walkdoors.

For Iowa contractor click here

Metal Building in Scott City, Kansas

Metal Building Outlet supplied this steel building in Scott City, Kansas.  Scott City is in Scott County and is located in central western Kansas. It is near the border of Kansas and Colorado about 130 miles from Hays.

This light stone Nucor building was purchased in February, 2013 to be used as farm equipment storage, specifically to store the owner’s combine. The metal building measures 60’x60’x17’ with a roof pitch of 2:12. The building has two 24’x16’ framed openings and a 3’x7’ walkdoor.

For Kansas contractor click here

Steel Building in Ville Platte, Louisiana

Steel Building in Boulder, Wyoming

Metal Building Outlet sourced this pre-engineered steel building in Boulder, Wyoming, in early December of 2019.

Intended for storage purposes, the building offers unrivaled durability, making it particularly well-suited for guarding assets in a wide range of sizes. Standing 40’x60’x17’ in size, the storage building has a broad clear span, providing as much usable storage space as possible, and it also has a striking, Ash Gray exterior that enhances its curb appeal.

The roof of the building has a 3:12 pitch and is a complementing Burnished Slate color, and (4) framed openings make the storage building accessible for users. Featured throughout the property are (2) 12’x14’ overhead door openings, (1) 10’x8’ opening and (1) 3’4”x7’2’ walk door opening.

The steel storage building also has several elements that make it better-suited for Wyoming’s sometimes-harsh climate, including a 43-pound snow load and a 115-mph wind speed rating. An unincorporated and lightly populated community in west-central Wyoming’s Sublette County, Boulder, Wyoming, sits about 12 miles from Pinedale and about 25 miles outside Daniel.

Click here for assistance finding a Wyoming building contractor.

Steel Building in Bliss, Idaho

Metal Building Outlet was the provider of this prefabricated steel building in Bliss, Idaho, in early January of 2020.

Engineered for storage use, the Sagebrush Tan-colored building features top-of-the-line steel construction, resulting in optimal strength, durability and protection for goods stored inside. Once raised, the metal storage building stands a spacious 50’x150’x18’ in size, offering plenty of room for storing assets, while its roof is comprised of hardwearing, corrosion-resistant Galvalume metal and has a subtle 1:12 pitch.

Making the pre-engineered steel storage building particularly ideal for not only its intended use, but its geographic location, are several climate-related customizations, among them a 30-pound snow load and a 115-mph wind speed rating. A small, sparsely populated community, Bliss, Idaho, is a part of Gooding County. The community sits about 90 miles southeast of Boise and about 40 miles northwest of Twin Falls.

Click here for assistance finding an Idaho building contractor.

Metal Building in Joplin, Missouri

Metal Building Outlet sourced this pre-engineered metal building for a customer in Joplin, Missouri, in early December of 2019.

Used for storage, the building features rugged, reliable steel construction, resulting in optimal protection for the goods and assets kept inside. Once raised, the metal building is 60’x80’x14’ boasting high overhead clearance and a broad clear span that provide even more room for storage.

The building’s painted roof has a slight 2:12 pitch and is comprised of corrosion-resistant Galvalume steel sheeting, and (7) framed openings offer easy access inside. Included are (4) 12’x12’ overhead door openings and (3) 3’4”x7’2” framed walk door openings. Additional features include a 20-pound snow load and a 115-mph wind speed rating; inclusions made with respect for building code requirements in place in Joplin as well as the area’s typical climate characteristics.

Located in southwestern Missouri, the city of Joplin has land in both southern Jasper County and northern Newton County. It is part of the Joplin-Miami, Missouri-Oklahoma metro area.

Click here for assistance finding a Missouri building contractor.