Tag Archive for: metal building kits

Metal Building in Ravenwood, Missouri

Metal Building Outlet supplied this steel building in Ravenwood, Missouri in May, 2013. This metal building is used as a shop in Nodaway County, just ten minutes from Maryville and about half an hour from Albany.

The prefabricated metal building  were made by Garco. It is a 50’x60’x12’ shop building with a 1:12 pitched roof. This building features five of our most popular sizes of doors – (2) 10’x10’, (1) 12’x16’ and (2) 3’x7’ walk doors.

When ordering a building, our specialists can help you to determine proper wind and snow load requirements for you building based on your geographic region.  For this building, a wind load of 90 MPH and ground snow load of 20 PSF were determined to be best.

Contact Us for a local Contractor in Missouri

Metal Building in Byhalia, Mississippi

Metal Building Outlet provided this pre-constructed metal building in Byhalia, Mississippi, in late February of 2017.

Durable and long-lasting with an aesthetically pleasing exterior, the building stands 40’x50’x12’ in size. Sandstone in color, it is crafted using premium-quality steel materials, and it is covered and protected from above by a hardwearing, corrosion-resistant Galvalume metal roof with a 1:12 pitch.

Inside, the steel building features (3) framed openings, which include (1) 10’x10’ opening enclosing (1) 10’x10’ garage door and (2) 3070 openings, each of which encloses one of (2) 3070 walk doors. Additional project features include a snow load of 10 lbs. and a wind speed rating of 115 mph, inclusions made in consideration of the climate and weather patterns common through the Byhalia area. A small town set within north-central Mississippi’s Marshall County, Byhalia is situated not far from the towns and communities of Holly Springs, Potts Camp and Mount Pleasant.

Click here for assistance finding a Mississippi building contractor.

Metal Building in Lenox Township, Michigan

Metal Building Outlet supplied this steel building in Lenox Township, Macomb County, Michigan in January, 2014. This building features steel components from Nucor and is used as equipment storage and warehouse for FDM Excavating, about 30 miles from Rochester hills and about 4 miles from Richmond.

Generously sized 90’x150’x24’ and featuring light transmitting panels across both side walls, this building also has 24 skylights in the ceiling panels.  Adding to the natural lighting are (6) 3’x5’ windows. For access to the interior, ten doors are installed on this warehouse/storage building (6) 16’x18’ and (4)3’x7’ walk doors.

The galvalume roof of this building has a 2:12 pitch. In order to meet the demands for wind and snow loads for southeastern Michigan, this building is rated for wind speeds of up to 90 MPH and a ground snow load of 25 PSF.

For Michigan contractor click here

Steel Storage Building in Shelby Township, Michigan

Metal Building Outlet supplied this prefabricated steel building in Shelby Township, Michigan.

Light stone in color with an eye-catching green roof and a 1:12 roof pitch, the Michigan metal building stands 30’x40’x16’, and is used as a storage area by FDM Contracting, Inc., a Shelby Township-based general contracting company. Constructed using Nucor Building Systems components, the building has (1) framed opening, which is 14’x14’ in size.

Shelby Township experiences considerable annual snowfall that trumps national averages, and with the area’s typical climate and weather patterns in mind, the steel building was constructed with a wind speed of 90 mph and a snow load of 18 lbs.

Located within Oceana County in Michigan’s Lower Peninsula, Shelby Township lies about 25 miles from Southfield and 17 miles outside Pontiac.

For Michigan contractors click here

Steel Building in Paducah, Kentucky

Metal Building Outlet supplied this steel building in Paducah, Kentucky for use as a warehouse. Paducah located about 150 miles away from Bowling Green.

The warehouse was used to store farm equipment as well as provide additional shop space. This Nucor building measures 60’x100’x16’ and has a roof pitch of 1:12.  In addition, the structure has two 12’x12’ overhead doors and two 3’x7’ walkdoors.  Paducah is a city located in McCracken County, Kentucky.

For more information, click here to contact a Kentucky contractor.

Metal Building in Georgetown, Kentucky

Metal Building Outlet supplied this prefabricated metal building for a buyer in Georgetown, Kentucky.

Now used as a cold-storage area, the rugged and low-maintenance building crafted from premium-grade steel components stands 80’x200’x18’ once fully erect. It boasts striking light stone-colored paint and a hardwearing, corrosion-resistant Galvalume metal roof with a 1: 12 pitch overhead.

Inside the cold-storage building are (4) framed openings, which include (1) 12’x12’ framed opening and (3) additional door frames housing 3070 walk doors. A wind speed of 115 mph and a snow load of 15 lbs. serve as additional building features. Both inclusions were made at the time of construction to enhance building durability given the climate typical of Georgetown and the surrounding region.

A home-rule class city located within Kentucky’s Scott County, Georgetown is situated about 19 miles from the Kentucky capital city of Frankfort and about 14 miles from Lexington.

Click here for help finding a Kentucky contractor.

Multipurpose Metal Building in Miami, Florida

Read more

Metal Building in Henderson, Nevada

Metal Building Outlet was pleased to supply this pre-engineered metal building for a customer in Henderson, Nevada, in mid-December of 2019.

Serving multiple purposes, the rugged, low-maintenance metal building stands 50’x60’x20’ in size once erect, featuring an open, clear-span design and high overhead clearance. Constructed using premium-quality steel parts, the building stands strong in the face of harsh weather, pests and numerous other construction hazards, while a Polar White-colored roof with a 1.5:12 pitch provides protection from above.

Making the multifunctional metal building easily accessible for users are (9) framed openings in an array of different sizes. Found throughout the metal building are (1) 20’x17’ opening, (1) 3070 walk door opening, (1) 20’x18’ overhead door opening, (1) 12’x14’ overhead door opening and (5) 3’x4’ windows.

A 100-mph wind speed rating serves as another enhancement added in adherence to applicable building codes in place in Henderson. Nevada’s second-largest city, Henderson is located in southern Nevada’s Clark County. Part of the Las Vegas metro area, Henderson lies about 16 miles southeast of La Vegas and about 13 miles outside Paradise, Nevada.

Click here for assistance finding a Nevada building contractor.

Metal Building in Milford, Indiana

Metal Building Outlet supplied this prefabricated metal building in Milford, Indiana.

The steel structure is a Nucor brand building and was recently ordered to be used for hay storage on a family farm. The structure was relatively large with dimensions of 80’x160’x22′ and a roof pitch of 3:12.

Milford is located approximately 41 miles away from the city of South Bend and 12 miles away from the town of Warsaw. Given the typical climate conditions in the area it was necessary to account for wind and snow to ensure structural integrity.  The structure was rated to withstand 90mph wind loads and a snow load of 30psf.  Since the white structure would be used to store hay insulation was not necessary.

For contractors in Indiana click here

Metal Building in Adelo, Illinois

This Nucor building was purchased from Metal Building Outlet in 2011 is used to store farm equipment in Adelo, IL. Adelo is about 32 miles from Davenport.

The gray and galvalume structure was 60’x100’x16′ with a roof pitch of 2:12. In addition, the structure had multiple framed openings including a 10×12 overhead sectional garage door, two 20×14 overhead sectional garage doors, and two 3×7 walkdoors. The R-19 roof insulation and R-14 wall insulation help keep the heating & cool costs down.

For contractors in Illinois click here