Metal Building in Dillon, South Carolina

This steel building was supplied by Metal Building Outlet in Dillon, South Carolina.  Made by US Buildings this arch style building is used for storage.  It measures 20’x43’x12’and is located in the county seat of Dillon County about 30 miles from Florence and 29 miles from Lumberton.

Click here to contact a South Carolina contractor.

Steel Building in Columbia, South Carolina

Metal Building Outlet supplied this steel building to Ephram Thomas Brickhouse in Columbia, South Carolina.  The Nucor-brand building measured 30’x50’x13-9’ and had a roof pitch of 1:12.  The metal building was used for a shop in Columbia, the capital of South Carolina and the county seat of Richland County.  A few neighboring cities include Florence and Sumter, South Carolina.

Click here to find a South Carolina contractor

Steel Building in Ridgeville, South Carolina

This Nucor-brand steel building was supplied by Metal Building Outlet in Ridgeville, South Carolina.  The light gray metal building measured 100’x175’16’ and had a roof pitch of 1:12.  In addition, the building had a number of framed openings including five 10’x12’ openings, four 4’x4’ famed openings and five 3’x7‘.

Ridgeville is a small town located in Dorchester County.  The town is located about 84 miles from Columbia and 19 miles from St. George.  Click here to locate a South Carolina contractor today.

Metal Building in Aiken, South Carolina

Metal Building Outlet provided this steel building to a customer in Aiken, South Carolina.  The Heritage-brand storage building measured 45’x152’x15’ and had a roof pitch of 1:12.  It has light stone walls and a galvalume roof.

Aiken is a travel destination located in Aiken County.  The city is located approximately 56 miles from Columbia and 128 miles from Charleston. Click here to find a South Carolina contractor.

Metal Building in Wadmalaw Island, South Carolina

This Garco-brand steel building was supplied by Metal Building Outlet to Commercial Builders in Wadmalaw Island, South Carolina.  The metal building measured 30’x60’x12’ and had a roof pitch of 1:12.  The shop had a number of framed openings including two 3’x7’ walkdoors and a 12’x10’.  Typical climate conditions on Wadmalaw Island were taken into account.  The shop had R-13 roof insulation and R-10 wall insulation installed to lower cooling and heating costs.  In addition to being energy efficient, the shop was rated to withstand a wind load of 130 mph and a snow load of 5 psf.

Wadmalaw Island is located in Charleston County.  The island is about 19 miles off the coast of Charleston and 23 miles off the coast of North Charleston.  Click here to find a South Carolina contractor today.

Steel Building in Swansea, South Carolina

Metal Building Outlet supplied this metal building to a customer who lives in Swansea, South Carolina.  The building was purchased for his business in Puerto Rico.  The Nucor-brand building measured 60’x50’x16’ and had a roof pitch of 1:12.  It has light stone walls and a galvalume roof. Some issues transporting the steel building were quickly remedied and the shop eventually was delivered to its final destination in Puerto Rico.

Swansea is a small town in Lexington County, located about 21 miles from Columbia and 100 miles from Charleston.  Click here to connect with a South Carolina contractor.

Steel Building in Bennettsville, South Carolina

Metal Building Outlet supplied this Nucor-brand steel building for use as an airplane hangar in Bennettsville, South Carolina.  The stunning Polar White metal building measured 145’x10’x22’ and had a roof pitch of 1:12.  The airplane hangar was used to house a historic B17 Bomber. To reduce the impact of the hot and humid climate in the area R-19 roof insulation and R-13 in the sidewalls was used to reduce cooling costs in the metal building.

Bennettsville is the seat of Marlboro County in South Carolina.  It is located about 40 miles from Florence and 15 miles from Cheraw.   Click here to contact a South Carolina contractor.