Metal Building in Aspen, Colorado

Metal Building Outlet supplied this steel building in Aspen, Colorado, in the heart of Colorado’s High Country Pitkin County for Sunny Ranch. Aspen is about 45 miles from scenic Glenwood Springs and about 200 miles west of Denver. Being in the Colorado’s Rockies, accommodations needed to be added to make this building more sturdy for blustery blizzards and heavy snow pack.

The building was purchased in September, 2013 as a frame only structure. The owner bought the roof sheeting himself for this metal sand storage building. It has a wind rating of 90 MPH and is rated for ground snow load of 81 PSF (pounds per square foot). The size of the structure is 35’x60’x16’ and the roof has a pitch of 1:12.

Contact Us for a local Contractor in Colorado

Steel Building in Pagosa Springs, Colorado

Read more

Metal Building in Fairplay, Colorado

Metal Building Outlet supplied this metal building in Fairplay, Colorado, in September, 2013.  This building is owned by a general contractor who is using it as a personal shop and garage.  It is located about 70 miles from Leadville and about 40 miles from Bailey.

Read more

Metal Building in Westminster, Colorado

Read more

Steel Building in Alta, California

Read more

Metal Building in Oroville, California

Metal Building Outlet supplied this steel building in Oroville, California in August, 2013.  This steel building is located in Butte County about 15 miles from Gridley and 20 miles from Live Oak.

This high quality Garco metal building is used as a shop building and is 40’x60’x12’ with a galvalume 1:12 pitched roof. It has a wind load of 85 MPH. The building features four doors – two 10’x10’ and two 3’x7’ walk doors. The owner of this building upgraded to a heavier insulation package.

Contact Us for a local Contractors in California

Metal Building in Flagstaff, Arizona

Read more

Metal Building in Gilbert, Arizona

Read more

Steel Building in Hueytown, Alabama

Metal Building Outlet supplied this steel building in Hueytown, Alabama, for a general contractor in Jefferson County. Located about 50 miles from Tuscaloosa and about 20 miles from Hoover, this Steel Max building is rated to handle the high wind load and low snow loads of northern Alabama.

The owner of the building has erected several steel buildings and decided to erect this building himself.  Metal Building Outlet was able to help him get his building in the time frame he needed by putting the order in a rush status and changing the supplying factory from which the steel building components were shipped.

Used to store construction equipment, this building is a frame and roof only structure with finished dimensions of 40’x128’x10’.  It has a wind load of 90 MPH and snow loads for ground and roof of 10 PSF and 7 PSF.

Contact Us for a local Contractors in Alabama

Metal Building in Irondale, Alabama

Metal Building Outlet supplied this steel building in Irondale, Alabama, a suburb of Birmingham. Located in northern Alabama, this Jefferson County building is only about 5 miles from Birmingham and about 10 miles from Leeds.

This Nucor metal building is used as a lean-to and is attached to an existing building with one open side and a galvalume single slope roof (1:12 pitch). The roof has a height of 16’ on the lower side and 20’2” where it attaches to the existing building.

Since the climate in Irondale means that there is little or no snow, this building has a very low snow load with the ground snow load being 5 PSF and the roof having a snow load of 3.5 PSF. Wind load for this building is rated to 90 MPH for the blustery climate, prone to storms and in a hurricane risk area.

In addition to the open back side of the building, there are two doors. There is a 3’x7’ walk door and a 14’x14’ door. The completed size of this metal lean-to is: 50’x200’x16’.

Contact Us for a local Contractors in Alabama