Metal Building in Oak Ridge North, Texas
Metal Building Outlet supplied these two steel buildings in Oak Ridge North, Texas in December, 2012. These Nucor buildings were purchased by Dish Network to be used as office and warehouse space in Oak Ridge North.
Steel Building in Honea Path, South Carolina
Metal Building Outlet supplied this steel building in Honea Path, South Carolina in December, 2013. The owner of this building purchased two buildings for his personal property at that time. One is used as a horse stall and this one is used as his personal residence. This home features solar panels and the owner lives off the grid, using solar energy and well water – less than an hour’s travel to Greenville and Spartanburg in northwest South Carolina.
This Nucor metal building features many doors and windows and has a finished size of 50’x75’x12’. The roof for this building has a 1.6:12 pitch. There are (3) 3’x7’ walkdoors, (2) 9’x8’ overhead doors, and (1)10’x10’ overhead door which were purchased for this house. There are (5) 4.5’x3’, (1) 3’x3’ and (1) 9’x5’2” windows to flood the interiors of the home with natural light.
Since the Anderson and Abbeville area is known for high winds, this house is rated for winds up to 115 MPH. The roof snow load is 7.5 PSF. To keep this building comfortable in different weather, the walls and roof are insulated with high quality single layer 6” fiberglass insulation panels with an R-19 rating.
For South Carolina contractor click here
Metal Building in Hollywood, South Carolina
Metal Building Outlet supplied this steel building in Hollywood, South Carolina in April, 2013. This metal shop building features high quality Nucor components and is located in southeastern South Carolina about twenty minutes from Green Pond and Charleston.
The exterior walls of this personal shop are light stone and the roof is galvalume. The finished size of the shop is 30’x40’x13’. There are two entrances to this building a 3’x7’ walk door and a 16’x8’ overhead door. It is built to withstand the high winds that Mother Nature dishes out to residents of Charleston County and is rated for wind speed of 130 MPH. Snow load for the 2:12 pitched roof of this metal shop is 4 PSF.
For South Carolina contractor click here
Steel Building in Owasso, Oklahoma
Metal Building Outlet supplied this steel building in Owasso, Oklahoma in December, 2012. This Nucor metal building is used as a laundry facility and storage area for an apartment complex in northeastern Oklahoma in Rogers County. Located in a suburb of Tulsa and is less than half an hour drive to Bartlesville.
The exterior walls for the building are light stone and the roof is galvalume. During the ordering process, the sizes of the proposed building were changed due to the need to meet various building codes. The final size of the building is 38’x40’x12’. The end wall was redesigned to accept a wainscot of brick panels. Two large 12’x12’ doors allow easy access to the interior of the building as well as a 6’x7’ and three 3’x7’ knock down doors.
There are gutters and downspouts included to accommodate the sometimes heavy rains of the area north of Tulsa County and the roof features a 2:12 pitch. Additionally, to accommodate the climate of the area, energy saving fiberglass insulation is installed on both the roof and walls. The roof is insulated with a single layer of 6” R-19 fiberglass insulation and the walls are insulated with a single layer of 4” R-13 insulation.
This building is rated for sustained wind speeds of 90 MPH and a 10 PSF ground snow load, making it ideally planned for the often unpredictable Oklahoma climate. Additionally, this laundry facility and metal storage building holds honor of the Oklahoma Metal Building Design Certification.
For Oklahoma contractor click here