Metal Building in Odenville, Alabama
Metal Building Outlet supplied these two metal buildings to a customer in Odenville, Alabama, in June of 2014. Sized 40’x60’x14’, these Steelmax-brand buildings together serve as a workshop. The buildings boast a total of (8) framed openings, including (4) 10’x12’ overhead doors and an additional (4) 3070 Lever Lock doors, and each has a Galvalume roof with a 1:12 roof pitch.
To ensure that those using the buildings stay comfortable regardless of seasonal or climate conditions, the two buildings were constructed with R-13 roof insulation in both the roof and walls. Additionally, both buildings have a wind speed of 90 mph and a ground snow load (GSL) of 5 lbs.
Odenville is a small, 3.2 square mile town of under 1,500 inhabitants located in St. Clair County, in north-central Alabama. It lies about 30 miles from Birmingham, the state’s largest city, and 86 miles outside Tuscaloosa.
For Alabama contractor click here
Steel Building in Gig Harbor, Washington
Metal Building Outlet supplied this steel building in Gig Harbor, Washington in August, 2013. Occasionally, permits are not approved for a pending building, as was the case for this building. Purchased to be used as a marijuana grow operation in Pierce County and less than thirty minutes from Tacoma and Bremerton, due to city regulations, this building order needed to be cancelled .
The building was intended to be polar white on the exterior with a galvalume roof with a 1:12 pitch. The size of this building, comprised entirely of Garco components, is 60’x100’x12’. Originally ordered were three doors (2) 3’x7’ walk doors and (1) 10’x8’ overhead door. The building had a wind speed rating of 85 MPH, appropriate for north western Washington.
When these incidents occur, Metal Building Outlet works to help the customer solve the challenge in a fair manner. Buildings ordered but subsequently cancelled often become part of deeply discounted used buildings. In this instance, we were able to satisfy the customer by supplying 6” R-196” R-19 high efficiency fiberglass insulation for a retrofit on a rented building which the customer uses for his business.
For Washington contractor click here
Metal Building in Ellensburg, Washington
Metal Building Outlet supplied this steel building in Ellensburg, Washington in April, 2014. This building features steel components from Garco and is used as a marijuana grow house about 35 miles from Yakima and about 80 miles from North Bend in central Washington.
This building is 60’x100’x16′ and features a single 12’x14’ roll coil door. The roof has a 1:12 pitch and is galvalume. In order to accommodate the climateof Kittitas County, this building has a wind speed load rating of 110 MPH and the walls and roof are insulated with high efficiency steel building fiberglass insulation. The walls are insulated with a single layer of 4”R-13 fiberglass insulation and the roof has a single layer of 6” R-19 insulation installed.
This building was ordered with a customer request for a rush and a three week delivery was promised and fulfilled. The foundation design was an overnight project.
For Washington contractor click here
Metal Building in Fredricksburg, Texas
Metal Building Outlet supplied this steel building in Fredricksburg, Texas in April, 2014. This building features steel components from Nucor. It is used as a personal shop about 70 miles from San Antonio and Austin in central Texas.
The exterior walls of this personal shop are light stone colored with an attractive red brick trim and has a galvalume 1:12 pitch roof. The finished dimensions of this shop are 30’x50’x12’.
Allowing easy access are 6 entrances (4) 10’x10’ overhead doors and (2) 3’x7’ walk doors. In order to meet the demands of Gillespie County, this shop building is rated for wind speeds of 90 MPH and the roof carries a snow load of 5 PSF.
The owner of this shop reports a high level of satisfaction in his purchase as well as the ease of purchasing a building with Metal Building Outlet.
For Texas contractor click here
Steel Building in Canyon, Texas
Metal Building Outlet supplied this steel building in Canyon, Texas in March, 2013. This building in northern Texas is used as a shop and is about 20 miles from Amarillo and about 100 miles from Lubbock in Randall County. This shop features steel components from Nucor.
The 60’x125’x18’ shop has 20 high quality skylights to flood the interior with natural lighting. It has light stone colored exterior walls and a polar white 2:12 pitch roof. In order to be properly suited for the climate, this shop has a wind speed rating of 90 MPH and a snow load of 20 PSF.
For Texas contractor click here
Metal Building in Fulshear, Texas
Metal Building Outlet supplied this steel building in Fullshear, Texas in March, 2014. This building features steel components from Nucor and is used as a shop about 35 miles from Houston and Cypress in Southeastern Texas.
The exterior walls of this building are burnished slate and the 1:12 pitched roof is galvalume. The total size for this shop is 50’x100’x12’. There are several doors and windows for access to the building, as well as, providing natural light. Of the 5 doors, (2) are overhead 12’x12’ and the remaining (3) are walk doors 3’x7’. The two windows are 3’x3’.
In order to withstand the high winds of Fort Bend County, this building has a high wind load 110 MPH. There is not a snow load for this shop building due to the climate of south Texas. Additionally, this building has high quality VRR-Plus faced insulation for the roof and walls with an anchor bolt package which is designed to match the base plates.
For Texas contractor click here
Contact Our Office
Metal Building Outlet
Address
7651 Shaffer Pkwy, Suite A
Littleton, CO 80127
Hours:
M-F: 8:00 am-6:00pm (MST)