Steel Building in Bennettsville, South Carolina

Metal Building Outlet supplied this Nucor-brand steel building for use as an airplane hangar in Bennettsville, South Carolina.  The stunning Polar White metal building measured 145’x100’x22’ and had a roof pitch of 1:12.  The airplane hangar was used to house a historic B17 Bomber. To reduce the impact of the hot and humid climate in the area R-19 roof insulation and R-13 in the sidewalls was used to reduce cooling costs in the metal building.

Bennettsville is the seat of Marlboro County in South Carolina.  It is located about 40 miles from Florence and 15 miles from Cheraw.   Click here to contact a South Carolina contractor.

Metal Building in North Kingstown, Rhode Island

Read more

Metal Building in Hopwood, Pennsylvania

Metal Building Outlet supplied these steel buildings in Hopwood, Pennsylvania in the southwestern corner of the state in Fayette County.  Hopwood is about 60 miles from Philadelphia and 35 miles from Hutchinson in the South Union Township.

The owner purchased two buildings for personal shop and storage space.  These metal buildings were purchases in September, 2010.  Featuring white exterior walls these Nucor buildings have finished sizes of 40’x100’x16’ and 40’x60’x16’ with a galvalume roof.  The roofs have a 1:12 pitch. These Nucor metal shop buildings each have a 14’x14’ overhead door and a 3’x7’ walkdoors.

For Pennsylvania contractor click here

Steel Building in Williamsport, Pennsylvania

Metal Building Outlet supplied this steel building in Williamsport, Pennsylvania.  Located in north central Pennsylvania in Lycoming County Williamsport is about 100 miles from Scranton and about 85 miles from Wikes Barre.

This Garco metal building was purchased in September, 2012 by Gulfstream Services to be used as a heavy offshore maintenance facility.  This metal building is large with finished dimensions of 80’x120’x16’ to house heavy equipment.

One of the unique features of this metal maintenance shop is that there are 10 light transmitting wall panels, allowing natural light to enter into it.  The sagebrush tan building has a galvalume roof with a pitch of 1:12. In order to provide access for various equipment there are two large 16’x14’ overhead roll up doors and two 3’x7’ walkdoors.

For Pennsylvania contractor click here

Steel Building in Fort Washington, Pennsylvania

Metal Building Outlet supplied this steel building in Fort Washington, Pennsylvania.  Fort Washington is located in the extreme south eastern corner of Pennsylvania about 25 miles from Philadelphia and 85 miles from Lancaster.

This Montgomery County metal building was purchased in October, 2012 by a professional independent contractor as a training kit. He used it to provide hands-on training to other general contractors showing the whole erection processes of a prefabricated metal building by Nucor. The finished building is 30’x40’x20’ with a galvalume roof that has a 1:12 pitch.

For Pennsylvania contractor click here

Metal Building in Albion, Pennsylvania

Metal Building Outlet supplied this steel building in Albion, Pennsylvania.  Albion is located in the extreme northwestern corner of the state in Erie County.

This metal shop building was purchased in August, 2011 as an additional building for Copeland Lumber which is about 30 miles from Erie and 35 miles from Jamestown. The Nucor metal building has a finished size of 80’x150’x30’ and a galvalume roof with a 1:12 pitch.

For Pennsylvania contractor click here

Steel Building in Eagle Creek, Oregon

Metal Building Outlet supplied this steel building in Eagle Creek, Oregon located in north western part of the state.  About 10 miles from both Sandy and Estacada Eagle Creek is in Clackamas County.

This Garco metal building has been used by its owner as a personal shop building since its purchase in December, 2012.  With light stone colored exterior walls and a polar white roof the building’s exterior is a welcome addition to the owner’s personal property. It features a wind load of 95 MPH and snow load of 20 PSF making it sturdy and durable.  With a finished size of 36’x72’x12’ and three doors two of them are larger 10’x10’ overhead doors and one is a 3’x7’ walkdoor.

For Oregon contractor click here

Steel Building in Kingston, Oklahoma

Metal Building Outlet supplied this steel building in Kingston, Oklahoma located in extreme south central Oklahoma.  Kingston is a small town in Marshall County about 30 miles from Ardmore and 20 miles from Durant.

Purchased in August, 2011this metal building is used as an RV storage building.  This Nucor metal building has a finished size of 60’x150’x16.  The roof on this building has a pitch of 1:12. This particular building is one of several purchased as a frame only by this general contractor which is quite common.

For Oklahoma contractor click here

Metal Building in Hennessey, Oklahoma

Metal Building Outlet supplied this steel building in Hennessey, Oklahoma in Kingfisher County not far from Kingfisher and Piedmont.  This Garco metal building was purchased to be used as a personal metal shop and storage building in June, 2012.

The building itself has light stone exterior walls and a galvalume roof.  The building has a wind load rating of 90 MPH.  With a snow load of 7 PSF for the 1:12 pitched roof and 10 PSF for the ground making this building durable in Oklahoma’s varying climate. One of the doors is a 12’x14’ overhead door and the other is a 3’x7’ walkdoor.  This metal shop building has completed dimensions of 50’x60’x16’.

For Oklahoma contractor click here

Metal Building in Sayre, Oklahoma

Metal Building Outlet supplied this steel building in Sayre, Oklahoma used since November, 2012 as a garage for Johnson Fertilizer.  Sayre located in south western Oklahoma is in Beckham County, about 15 miles from Elk City and 45 miles from Clinton.

This Garco metal building has light gray exterior walls and a white roof.  The white roof has a pitch of 3:12 on this building. Additionally, there are ten 3’x5’ light transmitting panels in the walls to allow natural light to enter the metal building.  The garage is a spacious 50’x60’x10’ with two 14’x14’ overhead roll up doors.

For Oklahoma contractor click here