Metal Building in Roanoke, Virginia

Metal Building Outlet supplied this steel building in Roanoke, Virginia.  Purchased in January, 2013 this Roanoke County building is about 55 miles from Lynchburg and 190 miles from Richmond.

This steel building is used as a storage building and is 50’x60’x16’.  There are four entrances, two of which are 14’x14’ overhead doors and the remaining two are 3’x7’ walk-through doors. The building has a wind load of 90 MPH and roof snow loads of 17.5 PSF and 25 PSF ground snow load. Gutters were also ordered with the building.  We helped the owner worked extensively with his local building department to receive all building permits to allow this building to be assembled as planned.

For Virginia contractor click here

Farm Equipment Metal Storage Building in Muldrow, Oklahoma

Metal Building Outlet supplied this steel building in Muldrow, Oklahoma in March, 2014.  It is being used to store farm equipment and other machinery.  Situated on the western border of Oklahoma and Arkansas, this building is about 170 miles from the capitols of both states – Oklahoma City and Little Rock.  This building was completed using SteelMax prefabricated steel components.

This machinery storage building is 80’x100’x14’ and has a galvalume roof with a 2:12 pitch. In order to move the equipment in and out of the building, there are three doors (2) 14’x14’ overhead doors and a 3’x7’ walk door. The building also features a 4’x3’ window.

To meet the demands of the climate in Sequoia County it is rated for wind speeds up to 90 MPH and has a snow load of 7 PSF for the roof.

For Oklahoma contractor click here

Steel Shop Building in Holmesville, Ohio

Read more

Steel Church Building in Aurora, Colorado

Metal Building Outlet supplied this steel church building in Aurora, Colorado in April, 2014.  This building features steel components from Nucor and is used as an church in Arapahoe County, about 30 miles from Strasburg and 10 miles from Denver.

This church building is 60’x100’x14’ and features a 3:12 pitch on the roof.   Since the Denver Metro region is well known for its variations in climate (heat, cold, severe weather), this church building is rated for wind speeds up to 100 MPH and roof snow loads of 30 PSF.

For Colorado contractor click here

Steel Building in Cortez, Colorado

Read more

Steel Building in Bayfield, Colorado

Read more
Hay Barn

Metal Building in Parker, Colorado

Parker, CO

Read more
Aircraft Hangar

Metal Hangar Building in Longmont, Colorado

Longmont, CO

Read more

Steel Building in Wiggins, Colorado

Metal Building Outlet supplied this steel building in Wiggins, Colorado in May, 2014.  Occasionally, after purchasing a metal building, the original owner forfeits the building due to various reasons, including the inability to receive proper building approval, etc.  This building was one which had been forfeited by the original owner and due to this, Metal Building Outlet was able to provide this building as a warehouse for the current owner at a significant discount. Additionally, Metal Building Outlet was able to offer assistance on freight for these Nucor components.

With instances such as these, there may be issues with getting the building up to code, since it may have been ordered for another purpose, with different specs and often with different requirements to meet local building codes. Our experts can help by working with the building department (as we did in this instance) to reduce headaches and meet all of your local building codes.

To meet the demands of this building in north eastern Morgan county (about 15 miles from Ft. Morgan and about 40 miles from Greeley), this building has wall insulation as well as wind and snow ratings appropriate to the climate.  The walls are insulated with high efficiency R-32 double layer (6” + 4”) insulation and the warehouse is rated for wind speeds up to 110 MIP and a snow load of 32 PSF.

This building has exterior walls that are fern green and a galvalume roof with a 1:12 pitch. The warehouse is 60x100x16’ it has a 12’x14’ overhead door and a 3’x7’ walk door.

For Colorado contractor click here

Steel Building in Glendale, Arizona

Metal Building Outlet supplied this steel building in Glendale, Arizona in February, 2014.  This building features steel components from Garco and is used as a shop, located about 140 miles from Flagstaff and about 125 miles from Tucson in Maricopa County.

This metal shop is 60’x60’x16’ and has been personalized with five entrances.  Of these, three are high quality overhead doors (2) 10’x8’ and (1) 12’x14’). The remaining two  doors are 3’x7’ walk doors.

The roof for this shop are galvalume and have a 1:12 pitch.  All of our buildings can be customized for the climate with optional insulation ,as well as, wind and snow loads to meet building codes or personal preferences.  This building in Southwestern is rated for wind speed for up to 90 MPH.

For Arizona contractor click here