Prefabricated Steel Workshop in Palatka, Florida
Metal Building Outlet secured this pre-engineered steel building for a buyer in Palatka, Florida, in late March of 2018.
Designed to holds its own despite Florida’s wet weather and sometimes strong winds, the building stands 40’x80’x16’ in size and now functions as a shop for its owner. Rugged and reliable, it boasts a striking, Saddle Tan exterior, while a hardwearing, corrosion-resistant Galvalume metal roof with a 1:12 pitch sits overhead, helping prevent moisture-related damage.
The prefabricated steel shop features (4) framed openings; (2) 10’x12’ openings enclosing (2) 10’x12’ doors, and (2) 3070 openings, each enclosing one of (2) 3070 walk doors. A 130-mph wind load serves as an additional accommodation made in consideration of the strong storm activity that sometimes comes through the region. A part of northern Florida’s Putnam County, the city of Palatka lies about 24 miles outside Crescent City, Florida, and about 45 miles east of Gainesville.
Click here for assistance finding a Florida building contractor.
Steel Building in Shawnee, Colorado
Metal Building Outlet supplied this steel building in Shawnee, Colorado, in December, 2013. This steel building is used as a shop dedicated to building both hot rods and race cars. It is located about 5 miles from both Bailey and Grant. The owner of this Park County building selected several upgrades in order to make his building energy efficient and suitable to withstand the harsh snowy weather common in the Rocky Mountain region.
When buying a metal building to house equipment or vehicles, it is important to be sure to have one that is not only adequately sized (height, width and length), but to have access to the interior for the equipment or vehicles. There are many different sizes of doors available to allow you to select one that will meet all of your needs. The owner of this Nucor building designed his building to be 40’x60’x14’ with a roof pitch of 2:12. In addition, entry doors of 12’x12’ and a walk door 3’x7’ were added to the building.
The wind speed of this building is 110 MPH and the ground snow load is 65 PSF, both adequately strong enough for the winter climate in the Rockies. The owner of this building added a highly energy efficient insulation package as well as a 2’ overhang on three of the four sides.
Contact Us for a local Contractor in Colorado
A Prefabricated Metal Building in Arvada, Colorado
Metal Building Outlet was the supplier of this pre-engineered steel building in Arvada, Colorado, in March of 2018.
Open and expansive, the building features premium-quality steel construction and offers an efficient, versatile clear-span design. Now used for unspecified private purposes, the building stands 100’x120’x18’ in size, while a rugged Galvalume roof with a 1:12 pitch sits overhead, guarding against corrosion and the Colorado elements.
Distributed throughout the economical, adaptable metal building are (28) framed openings ranging in size and purpose, among them (4) 3’4”x7’2” openings, (8) 14’x14’ openings and (16) 3’x3’ windows that allow ample natural sunlight inside. Additional project features include a 115-mph wind speed rating and a high, 43-pound snow load, which enhance overall durability given the climate considerations of the region.
Part of central Colorado’s Jefferson and Adams counties, the city of Arvada is a suburb of Denver. It sits roughly 8 miles north of Lakewood and about 3 miles north of Wheat Ridge.
Click here for assistance finding a Colorado building contractor.
Metal Building in Townsend, Delaware
Metal Building Outlet supplied this steel building for a buyer in Townsend, Delaware during late spring of 2014.
Standing 40’x60’x16’ and crafted from Nucor Building Systems components, this striking steel building is now used as a shop.
Steel Building in Austell, Georgia
Metal Building Outlet supplied this steel building in Austell, Georgia, in early March of 2015.
Now used as a shop by the owner, the prefabricated, low-maintenance metal building is built from Steelmax components, and stands 60’x100’x20’ in size. Overhead is a durable, corrosion-resistant Galvalume roof with a 0.5:12 roof pitch.
In consideration of the typical climate and weather patterns of Austell, which is prone to considerable rainfall but very little, if any, annual snow, the building was constructed with a wind speed of 115 mph and a ground snow load of 10 lbs.
Considered part of the Atlanta metropolitan area, Austell has land in both Cobb and Douglas Counties. It sits about 86 miles outside Athens and 12 miles from Marietta.
For a Georgia contractor, click here.
Steel Building in Newark, California
Metal Building Outlet sourced this preconstructed metal building in Newark, California, in early June of 2017.
Rugged and designed to last the long haul, the building is comprised of premium-quality steel components, and it boasts great curb appeal and a finished size of 25’x70’x16’. A corrosion-resistant Galvalume metal roof with a 1:12 pitch sits above the structure, which now functions as a shop, and (5) framed openings serve as additional features. Included are (1) 3070 opening and (4) 12’x12’ openings.
A wind speed rating of 110 mph is another project attribute, a decision made with respect for the wind and climate patterns common in and around Newark and the surrounding landscape. An enclave located completely within the city of Fremont, Newark is a part of the Tri-City Area (alongside Fremont and Union City), within Alameda County. It sits about 38 miles from San Francisco and about 25 miles outside Oakland.
Click here for assistance finding a California building contractor.
Contact Our Office
Metal Building Outlet
Address
7651 Shaffer Pkwy, Suite A
Littleton, CO 80127
Hours:
M-F: 8:00 am-6:00pm (MST)